All types of problems can arise when it comes to plumbing, but none is smellier than problems in your sewer lines. Unfortunately, many homeowners wait until there is a blockage or sinkhole before calling a plumber out to assess their septic systems. Regular maintenance, proper care and professional cleaning may prevent problems from arising.

Sewer line problems in Ft. Worth may exhibit one or more of the following issues:

Substandard piping material – If improper or low grade plumbing materials are used, the pipes may not withstand soil conditions over the years. This can lead to Ft. Worth sewer line problems such as corrosion, cracks, shifting or other damage that may require expensive trenching to repair. Spend a little more when installing sewer lines and avoid the hassle later.

Infiltration of roots – Pipe corrosion or cracks may allow the infiltration of tree roots into the sewer lines. Unfortunately most root problems are not detected until the pipes are beyond repair, though regular cleaning of the lines may allow detection and prevention of this costly problem.

Leaking joints – The seals between pipes may wear or break due to shifting lines, low quality materials or improper installation. Sewer line problems in Ft. Worth that are caused by leaking joints can be detected by a loss of water pressure. This is due to the water that is escaping out of the pipe and into the ground. Such “silent leaks” can be repaired with the help of a licensed professional such as one from Jimmy Cash’s Plumbing.

Sunken pipes – Soil conditions may cause a sewer line to sink slightly, creating a valley where waste can collect and cause blockages. If you suspect your sewer line problems in Ft. Worth are due to a blockage that is not grease-related, contact us today. We are available 24 hours a day, every day of the year. We’ll get your plumbing working properly in as little time as possible, allowing you to go on with your day.

Pipe corrosion – As previously mentioned, the corrosion of pipes in sewer lines can cause a wide variety of problems. While you may not be able to prevent or avoid corrosion of an older sewer system, our plumbing experts can help mitigate the issue and repair your system to proper working order.

Blockage of pipes – If your toilet clogs repeatedly, there may be a blockage within your pipe that a plunger cannot solve. Blockages can be caused by grease buildup, obstruction of a foreign object or the infiltration of tree roots. A thorough cleaning of your sewer lines may solve the problem, so call us for a free phone estimate today.

Broken or cracked sewer pipes – If your Ft. Worth sewer lines are cracked or otherwise broken, they will likely need to be replaced. However, in some instances we are able to reline the pipes by essentially putting a pipe within a pipe. This may only temporarily solve the problem and depending on the usage at your home, may cause blockages to occur more frequently. Only our professional plumbers can advise you on your next move, so give us a call today.